top of page
Untitled design (48) (2).png

Dr. Pradip K. Maji's Publications

Prof. Pradip K. Maji is a dedicated and distinguished researcher with significant contributions to polymer science and engineering. Under his expert guidance, the group has grown consistently in both the quality and quantity of its publications.

With over 195 publications, an h-index of 46, and more than 6,500 citations, his research reflects a strong record of academic excellence and scientific impact. This section presents a glimpse into his extensive body of work and the diverse research contributions of his group.

Publication History

2026

192_2026_edited.png

192. Sunidhi Mishra, Amrita Chatterjee, Sourav Ghosh, Nitesh Choudhary, Sushmit Sen, Subhadip Saha, Dipankar Mandal*, P. K. Maji*.

189_2026_edited_edited.png

189. Sunidhi Mishra, Dalip Saini, Sudip Naskar, Sourav Ghosh, Bidya Mondal, Dipankar Mandal* and P. K. Maji*.

188_2026.jpg

188. Vaishali Rathi, Manoj Sathwane, Kamal Singh, KPS Parmar, P. K. Maji, Ranjeet K Brajpuriya, Ashish Kumar.

187_2026_edited.png

187. Amrita Chatterjee, Agrima Yadav, Sushmit Sen, Sourav Ghosh, Nitesh Choudhary, Nilanjan Dey, Sunidhi Mishra, P. K. Maji*

184_2026_edited.png

184. Surabhi S Raut, Shubham C Ambilkar, Bharat P Kapgate, Shiva Singh, P. K. Maji, Subhradeep Mandal, Amit Das, Chayan Das.

 

182_2026_edited.png

182. SK Kardam, R Kumar, VK Jha, P.K. Maji, A Verma, C Verma.

 

181_2026_edited_edited.png

181. Vaishali Rathi, Kamal Singh, Manoj Sathwane, Jitender Kumar, Muskan Verma, Vinay Kumar,

P. K. Maji, KPS Parmar, Ranjeet K Brajpuriya, Ashish Kumar

In The News

2026

m_an6c01222_0011.png

202. Suman Mondal, Jasleen K Bhatia, Ayan Roy, Sourav Ghosh, Shirsendu Mitra, Pradip K Maji*, Kalisadhan Mukherjee.

189_2026_edited_edited.png

189. Sunidhi Mishra, Dalip Saini, Sudip Naskar, Sourav Ghosh, Bidya Mondal, Dipankar Mandal* and P. K. Maji*.

188_2026.jpg

188. Vaishali Rathi, Manoj Sathwane, Kamal Singh, KPS Parmar, P. K. Maji, Ranjeet K Brajpuriya, Ashish Kumar.

187_2026_edited.png

187. Amrita Chatterjee, Agrima Yadav, Sushmit Sen, Sourav Ghosh, Nitesh Choudhary, Nilanjan Dey, Sunidhi Mishra, P. K. Maji*

184_2026_edited.png

184. Surabhi S Raut, Shubham C Ambilkar, Bharat P Kapgate, Shiva Singh, P. K. Maji, Subhradeep Mandal, Amit Das, Chayan Das.

 

182_2026_edited.png

182. SK Kardam, R Kumar, VK Jha, P.K. Maji, A Verma, C Verma.

 

181_2026_edited_edited.png

181. Vaishali Rathi, Kamal Singh, Manoj Sathwane, Jitender Kumar, Muskan Verma, Vinay Kumar,

P. K. Maji, KPS Parmar, Ranjeet K Brajpuriya, Ashish Kumar

In The News

2025

Sushmit_ASS_edited.png

180. Sushmit Sen, Amrita Chatterjee, P. K. Maji*.

Hydrogen Evolution Reaction: Mechanistic Insights and Emerging Design Strategies for Efficient Catalysis, Advanced Sustainable Systems, 2025

Keshav_chemSuschem_edited.png

179. Keshav Dev, Shiva Singh, Shakshi Bhardwaj, Kaushik Ghosh, P. K. Maji*.

Exploring Biomass‐Derived Carbon Dots as Multifunctional Fluorescent Material for Metal Ion Sensing and Anticounterfeiting, ChemPlusChem, 2025, e202500422.

Amrita_CEJ_edited.jpg

178. Amrita Chatterjee, Sushmit Sen, Sourav Ghosh, P. K. Maji*.

Bio-based PU-polysilazane transparent hybrid coating on cellulose substrates for barrier protection, UV stability and fire-resistance, Chemical Engineering Journal, 2025, 170426

Shiva__edited.png

177. Shiva Singh, Kaushik Ghosh, and P. K. Maji*.

"Carbon Dot–Cellulose Nanocrystal Hybrids from Biowaste for Security Encryption and Metal Ion Detection." ACS Applied Bio Materials (2025).

Monika_AEM_edited.png

176. Monika Chhajed, Vatsala Cilamkoti, Shakshi Bhardwaj, Chhavi Verma and P. K. Maji*.

Fabrication of Bioinspired Superhydrophobic Paper by Polyphenol/Fe2O3/Myristic Acid Coating for Self-Cleaning Property and Oil/Water Emulsion Separation, ACS Applied Engineering Materials, 2025

Amrita PVDF_edited_edited.png

175. Amrita Chatterjee, Sushmit Sen, Agrima Yadav, P. K Maji*.

Durable Polysilazane–PVDF Coating for Anti-Graffiti, Anti-Icing, and Environmental Protection of Surfaces, ACS Applied Polymer Materials, 2025

​

TOC_174_edited.png

174. Dakuri Ramakanth, Konala Akhila, Shiva Singh, Radheesh Sharma Meda, Lingala Lakshman Rao, Kirtiraj K. Gaikwad*, P. K. Maji*

Sustainable, High Barrier Smart Packaging Films for Shelf-Life Extension of Edible Oils. ACS Applied Biomaterials, 2025 

(Impact Factor-4.7, Q1)

TOC_173_edited.png

173. Amrita Chatterjee, Sushmit Sen, Dakuri Ramakanth, Shiva Singh, PK. Maji*

Unravelling Polysilazanes: Synthesis, Structure-Property Insights and Versatile Coating Applications. Adv. Colloid Interface Sci., 2025, 103508 Apr, 2025. (Impact Factor: 19.3, Q1)​

​

​

TOC_172_edited.png

172. Keshav Dev, Shiva Singh, Shakshi Bhardwaj, Somnath Samanta, R Saroha, P Roy, Kaushik Ghosh, PK Maji* 

Green Synthesis of Biomass-Derived Nitrogen-Doped Carbon Dots for Selective Co2+ and Nitric Oxide Sensing and Bioimaging Applications, Langmuir, 2025 (Impact factor: 3.9, Q1)​

​

​

TOC_171_edited.png

 Impact of Nanofillers on Vitrimerization and Recycling Strategies: A review, Nanoscale Advances, 2025 (Impact Factor: 4.6, Q1)​

​

​

​

​

TOC_170_edited.png

170. Shakshi Bhardwaj, Shiva Singh, Nitesh Choudhary, PK. Maji*

One-pot Fabrication of Structurally Stable Cellulose Nanofibers/Biochar-Based Phase Change Composites with Enhanced Thermal Energy Conversion and Storage Capacity. ACS Applied Polymer Materials (2025), (Impact Factor: 4.7, Q1) (Front Cover)​

​

​

TOC_169_edited.png

169. Nilanjan Dey, Shakshi Bhardwaj, PK. Maji*

Recent Breakthroughs in the valorisation of lignocellulosic biomass for the advancement in the construction industry: A review, RSC Sustainability, 2025, (Impact Factor: 4.9, Q1)​

​

TOC_168_edited.png

168. Sushmit Sen, Amrita Chatterjee, Keshav Dev, Shakshi Bhardwaj, PK. Maji*

Cathodically electrodeposited nitrogen-doped carbon dot–acrylic nanocomposite coatings: a dual-function corrosion barrier and real-time corrosion sensor, RSC Applied Interfaces, 2025, 

TOC_167_edited.png

167. Nitesh Choudhary, Akshay Tomar, Shakshi Bhardwaj, Jakub Ćwiertnia, Dominik Just, Dawid Janas, Ramesh Chandra, PK. Maji*

Advancements in biomass-derived cellulose composite electrodes for supercapacitors: a review. Journal of Materials Chemistry A, (2025), 13, 4012-4042. (Impact Factor: 9.5, Q1)​

​

​

​

​

​

TOC_166_edited.png

166. Shiva Singh, Keshav Dev, Shakshi Bhardwaj, Dakuri Ramakanth, Khushboo Rani Singh, Krishna Mohan Poluri, Kaushik Ghosh, PK. Maji*

Biodegradable cellulose nanocrystal composites doped with carbon dots for packaging and anticounterfeiting applications. Nanoscale, (2025), 17(2), 904-918. (Impact Factor: 5.1, Q1)​

TOC_166_edited.png

165. Sourav Ghosh, Swarnav Koley, Madhuchhanda Maiti, PK. Maji*

Recyclable and Self‐Healing Polyurethane Vitrimers via Dynamic Bonding with In‐situ Polymerized PHPMA. Chemistry–An Asian Journal, e202401174. (2025), (Impact Factor: 3.3, Q1)

TOC_164_edited.png

164. Nitesh Choudhary, Akshay Tomar, Shiva Singh, Ramesh Chandra, PK. Maji*

Fabrication of a symmetric supercapacitor device using MnO 2/cellulose nanocrystals/graphite electrodes via sputtering for energy storage. Nanoscale, (2025), 17(3), 1289-1307. (Impact Factor: 5.1, Q1)

TOC_163_edited_edited_edited.png

163. Shiva Singh, Shakshi Bhardwaj, Dakuri Ramakanth, Radheesh Sharma Meda, Somya Jain, Kaushik Ghosh, PK. Maji*

Phase behaviour of chemically tailored cellulose nanocrystals and their appealing potential as invisible-ink for anti-counterfeiting. Cellulose, (2025), 32(1), 447-465. (Impact Factor: 4.8, Q1)​

​

​

TOC_162_edited.png

162. Shakshi Bhardwaj, Shiva Singh, Pragya Gupta, Nitesh Choudhary, PK. Maji* 

Role of morphological arrangements in cellulose nanofiber-based aerogels for thermal insulation: A systematic review, International Journal of Green Energy, 22, no. 8 (2025): 1491-1512.  (Impact Factor: 3.1, Q2)​​

​

​

​

TOC_161_edited.png

161. Amrita Chatterjee, Sushmit Sen, Shakshi Bhardwaj, PK. Maji*

Polysilazane-Cross-Linked Acrylic Coatings for Wood: A Versatile Solution for Weather Resistance, Stain Repellence, and Fire Safety. ACS Applied Engineering Materials, 2025, 3, 2, 502–512. (Impact Factor: 3.5, Q1)​

​

​

​

​

TOC_160_edited.png

160. Priya E, Jay Sharma, Sudipta Sarkar, PK. Maji*

Phosphate Recovery from Wastewater by Cellulose-based Adsorbent Derived from Agricultural Waste and its Reuse as a Slow-Release Fertilizer, Journal of Environmental Chemical Engineering, 116716 (Impact Factor: 7.2, Q1)

TOC_159_edited.png

159. Pallabi Saha, Sikha Sarmah, PK Maji, Manoranjan Kar, Amar Dev, Tribedi Bora 

Modification in the structural and dielectric properties of ErCrO3 on Fe substitution, Solid State Communications, 2025 (Impact Factor: =2.4, Q2)​​

​

​

​

TOC_158_edited.png

158. Amrita Chatterjee, Shashank Jha, Sushmit Sen, Keshav Dev, Chayan Das, PK. Maji*

 Hydroxyl-Functional Acrylic Adhesives: Leveraging Polysilazane Chemistry for Curing. RSC Applied Polymers (2025), 3 (3), 675-685, (Q1)

 

TOC_157_edited.png

157. Manoj Sathwane, Upendranath Nandi, Arnab Banerjee, PK. Maji*

Electrically insulative and thermally conductive hydrophobic composite sheets based on cellulose nanofibers for thermal interface applications. Polymer Composites. (2025), (Impact Factor: 4.7, Q1)

​

​

​

​

​

TOC_156_edited.png

156. Sushmit Sen, Amrita Chatterjee, PK. Maji* 

Acrylic–CeO2 nanocomposite coatings for dual protection: enhancing weathering and corrosion resistance on metal and cement substrates, Polymer International, 2025, (Impact Factor: 3.6, Q2)​

​

​

​

​

TOC_155_edited.png

155. Pragya Tiwari, Shakshi Bhardwaj, Uttam Saha, Shiva Singh, Lal Chandra, PK. Maji*

Integration of multifunctional properties in polyester textiles through graphene-derivative coating, Polymer International, 2025, (Impact Factor: 3.6, Q2)

TOC_154_edited.png

154. Paresh Nageshwar, Gopal Lal Dhakar, Shiva Singh, PK. Maji, Chayan Das

Development of Zn2+ Mediated Hydrogel With Reversible and Dynamic Crosslinking Network, Polymers for Advanced Technologies, 2025, 36: e70176. (Impact Factor: 3.4, Q2)​

​

​

​

​

​

TOC_153_edited.png

153. Sougata Sarkar, PK. Maji, TN Das, S Mandal, S Dutta, S Pramanik, S Saha 

In Situ Synthesis of Luminescent CdSe Quantum Dots Embedded in Cd(II) Metallohydrogels: A Hybrid Material for Selective and Naked-Eye Sensing of Hg22+ Ions, Inorganic Chemistry, 64(15), 7407-7421, 2025, (Impact Factor: 4.7, Q1)

TOC_152_edited.png

152. Rohit Jasrotia, Prakash Kanjariya, Piyus Kumar Pathak, Jahangeer Ahmed, Mohd Fazil, Tokeer Ahmad, Saad M Alshehri, Natrayan Lakshmaiya, Vaseem Raja, PK. Maji

Sol-gel fabricated Cu0. 6Zn0. 4-xCoxFe2O4 spinel ferrite based nano catalysts for green hydrogen generation, Journal of Sol-Gel Science and Technology, 2025, 1-13 (Impact Factor: 3.2, Q2)

TOC_151_edited.png

151. Aiswarya Poulose, Ajith Mathew, PK. Maji, Yves Grohens, Daniel Pasquini, Deepu A Gopakumar , Jinu Jacob George

Zinc oxide-functionalized hydrophobic cellulose nanofiber aerogel tailored for eliminating conventional ibuprofen tablet from water, Surfaces and Interfaces, (2025),  56, 105573. (Impact Factor: 6.3, Q1)

In The News

2024

Amrita_POC_edited.png

149. Amrita Chatterjee, Sushmit Sen, Shiva Singh, Shakshi Bhardwaj, PK Maji*

Corrosion protection of mild steel via cerium nitrate loaded acrylic-vinyl polysilazane based hybrid coatings. Progress in Organic Coatings (2024), 197, 108831 (Impact Factor: 7.3, Q1)

TOC_148_edited.png

148.  Suraj W. Wajge, Amit Das, PK Maji, Shiva Singh, Subhradeep Mandal, Chayan Das*

Investigating the Crucial Role of 1,2-Dimethyl Imidazole in Developing Ferric-Mediated Recyclable XNBR Composites. ACS Sustainable Resource Management (2024), 1, 9, 2158–2167 (Q1)

TOC_147_edited_edited.png

147. Pragya Tiwari, Shakshi Bhardwaj, Shiva Singh, PK Maji*

Facile fabrication of polyurethane/poly(methyl methacrylate) semi-interpenetrating polymer networks for enhanced mechanical and thermal properties. Polymers for Advanced Technologies (2024), 8, 35, e6556 (Impact Factor: 3.4, Q2)

TOC_146_edited.png

146. Shakshi Bhardwaj, Shiva Singh, Dakuri Ramakanth, Vinay Kumar Gupta, PK Maji*

Strategic insights of imparting flame retardancy into nano-cellulosic materials: A review. Nano-Structures & Nano-Objects (2024), 40, 101369. (Q1)

Frame 1 (1).png

145. Keshav Dev, Shiva Singh, Shakshi Bhardwaj, Prashant Kukreti, Dakuri Ramakanth, Pankaj Kumar, Saakshi Saini, Partha Roy, Vimal Chandra Srivastava, Kaushik Ghosh* Pradip K. Maji*

​Solvent-Selective Fluorescence Sensing of Mg2+ and Al3+ Ions by Pincer-Type NNO Schiff Base Ligand: An Experimental and DFT Optimized Approach, Wiley Chemistry European Journal (IF: 4.3, Q1) 

​

Frame 2 (1).png

144. Shiva Singh, Shakshi Bhardwaj, Nitesh Choudhary, Rohan Patgiri, Yoshikuni Teramoto, PK Maji*; 

Stimuli-responsive chiral cellulose nanocrystals based self-assemblies for security measures to prevent counterfeiting: A review. ACS Applied Materials and Interfaces (2024) (Impact Factor: 8.3, Q1)​

​

​

​

Frame 3.png

143. Dakuri Ramakanth, Konala Akhila, Bittu Prudhvi Kumar, Krtiraj K. Gaikwad, PK Maji*; 

Ultra-violet light-driven green oxygen scavenging composite made of PVA/NRL for active packaging: an alternative to metallic oxygen scavengers. RSC Green Chemistry (2024), 26, 9, 5293-5307 (Impact Factor: 9.8, Q1)

​

​

​

Frame 4.png

142. Chhavi Verma, Monika Chhajed, E. Priya, PK. Maji*;

Effect of polymeric spherulite coatings on optical properties of chiral nematic cellulose nanocrystal films. Journal of Polymer Science, 1–11 (2024) (Impact Factor: 3.9, Q1)

​

​

​

​

​

Frame 5.png

141. Shakshi Bhardwaj, Shiva Singh, Keshav Dev, Monika Chhajed, PK Maji*; 

Harnessing the flexibility of light-weight cellulose nanofiber composite aerogel for superthermal insulation and fire-protection. ACS Applied Materials and Interfaces (2024), 16, 14, 18075–18089 (Impact Factor: 8.3, Q1)

​

​

​

Frame 6.png

140. U Saha, T Rom, R Sakla, A Ghosh, B Mallick, SK Panda, PK Maji, AK Paul;

Investigation of the Role of 3 d-4 d Elements in a Disordered Double Perovskite toward Efficient Photocatalytic Energy Conversion and Electrochemical Energy-Storage Behaviors. ACS Applied Energy Materials (2024) (Impact Factor: 6.4, Q1)

​

​

Frame 7.png

139. Nitesh Choudhary, Shiva Singh, Gaurav Malik, Shakshi Bhardwaj, Siddharth Sharma, Akshay Tomar, Sheetal Issar, Ramesh Chandra, PK Maji*; 

 Investigating the Electrochemical Performance of Maleic Anhydride-Tuned Cellulose Nanocrystals and Single-Wall Carbon Nanosheet Hybrids for Supercapacitor Applications. RSC Sustainable Energy and Fuels (2024) (Impact Factor: 5.0, Q1)

Frame 8.png

138. Shiva S, Bhardwaj S, Pragya G, Keshav D, Kaushik G, PK Maji*;

Recent advances in cellulose nanocrystals-based sensors: A review. RSC Materials Advances (2024) (Impact Factor: 5.0, Q1)​

​

​

​

​

​

​

Frame 9.png

137. Gaurav Katoch, Rohit Jasrotia, Anant Vidya Nidhi, Ankit Verma, Sachin Kumar Godara, PK Maji, Afzal Hussain, Saad M Alshehri, Jahangeer Ahmed, Abhishek Kandwal, Gagan Kumar;

Impact of Cu and La on the structural, morphological, magnetic, photocatalytic, and antibacterial traits of cobalt spinel nanoferrites. Ionics (2024) 1-18 (Impact Factor: 2.3, Q1)

​

Frame 10 (2).png

136. Shreya Sharma, Wei Liang Lai, Sunanda Roy, PK Maji, Seeram Ramakrishna, Kheng Lim Goh; 

Gate-to-grave assessment of plastic from recycling to manufacturing of TENG: a comparison between India and Singapore. Environmental Science and Pollution Research (2024) 31, 42698-42718 (Impact Factor: 5.8, Q1)

​

​

Frame 11.png

135. Sayed Tahir Abbas Naqvi, Charanjeet Singh, Sachin Kumar Godara, Rajshree B Jotania, PK Maji, Chandan R Vaja; 

Tunable electrical and impedance characteristics of Co–Zn doped M-type Sr Hexaferrites: Role of grain, grain boundaries, electrical transport mechanisms and software/circuit modeling. Ceramics International (2024), 50 (5), 7323-7335 (Impact Factor: 5.2, Q1)

Frame 12 (1).png

134. Sushmit Sen, Amrita Chatterjee, Dakuri Ramakanth, Shiva Singh, PK Maji;

Recent advances in cathodic electrodeposition coatings with special reference to resin materials: A comprehensive review;  Progress in Organic Coatings (2024), (Impact Factor: 6.6, Q1)

​

​

​

Frame 13 (2).png

133. E Priya, Sudipta Sarkar, PK Maji;

A Review on Slow-Release Fertilizer: Nutrient Release Mechanism and Agricultural Sustainability. Journal of Environmental Chemical Engineering (2024) (Impact Factor: 7.69, Q1)

​​

​

​

​

Frame 14.png

132. RS Meda, S Jain, S Singh, D Ramakant, S Bhardwaj, PK Maji;​

Investigating the reactive reinforcement ability of maleic anhydride-modified cellulose nanocrystals via In-situ emulsion polymerization. ACS Omega (2024) (Impact Factor: 4.1, Q1)

​

​

​

​

​

Frame 15.png

131. Anshu S, Ovender S, Ankur M, Sain S, Udai. P S, PK Maji, Kaushik Ghosh;

Catalytic transfer hydrogenation of substituted nitro-aromatics through in-situ generated Co(0) nanoparticle from Co(II) complexes supported by pentadentate ligands. Molecular catalysis (2024), 555, 113835. (Impact Factor: 4.6, Q2)

​

​​

​

​

​

Frame 18 (1).png

130. Monika Chhajed, Chhavi Verma, PK Maji;

Recent advances in hydrophobic nanocellulose aerogels for oil spill applications: A review. Marine Pollution Bulletin (2024), 199, 116024 (Impact Factor: 5.8, Q1)

​​

​

​

​

Frame 17.png

129. Rishika Chakraborty, Avinash Sharma, PK Maji, Siddheswar Rudra, Arpan Kumar Nayak, Paresh Nath Chatterjee, Yadagiri Naik Banothu, Mukul Pradhan:

Nitrogen and oxygen self-doped hierarchical porous carbon nanosheets derived from turmeric leaves for high-performance supercapacitor. Inorganica Chimica Acta (2024) (Impact Factor: 2.55, Q2)

 

Frame 16.png

128. Pooja, Bikash Saha, Nitesh Choudhary, PK Maji, AK Bera, SM Yusuf, Chanchal Sow;

Physical Review B (2024), 109, 14, 144044 (Impact Factor: 3.7, Q1)

 

​

​

​

​

​

Frame 19.png

127. Sougata Sarkar, Tarasankar Pal, PK Maji, Soumen Dutta, Anjali Pal:

Redox transmetallation reaction mediated synthesis of Ni-Pd bimetallic nanocatalyst for pesticide degradation to value-added product. Inorganica Chimica Acta (2024) (Impact Factor: 2.55, Q2)

​

​

​

​

​

Frame 20.png

126. Pandey SK, Mishra S, Ghosh S, Rohan R, PK Maji

Self-healing polymers for aviation applications and their impact on circular economy. Polymer Engineering and Sciences (2024) 1‐37 (Impact Factor: 3.2, Q1)

 

​

​

​

​

​

​

Frame 21.png

125. E Priya, A Jha, S Sarkar, PK Maji

A urea-loaded hydrogel comprising of cellulose nanofibers and carboxymethyl cellulose: An effective slow-release fertilizer. Journal of Cleaner Production (2024), 434, 140215 (Impact Factor: 11.1, Q1)

​

​

​

​

​

​

Frame 22.png

124. M Sathwane, RK Deshmukh, KK Gaikwad, PK Maji;

A urea-loaded hydrogel comprising of cellulose nanofibers and carboxymethyl cellulose: An effective slow-release fertilizer. Journal of Cleaner Production (2024), 434, 140215 (Impact Factor: 11.1, Q1)

​

​

​

​

​

​

Frame 23.png

123. N Choudhary, S Singh, S Bhardwaj, S Gupta, U Nandi, R Chandra, PK Maji;

Valorization of nanocellulose from bael (Aegle marmelos correa) fruit waste shells: Surface chemistry and morphological analysis. Bioresource Technology Reports (2024), 25, 101727

​

​

​

​

​

Frame 24.png

122. S. W. Wajge, D. Basu, A. Das, S. Mandal, PK Maji, S. Singh, C. Das;

Dynamic co-ordination networks in carboxylated nitrile rubber and development of self-healing and recyclable rubber composites. Journal of Polymer Science (2024), 10.1002/pol.20230800 (Impact Factor: 3.4, Q2)

​

​

​

​

Frame 25.png

121. A Adaval, V Khurana, BB Bhatt, S Singh, D Gupta, PK Maji, M Aslam, TW Turney, GP Simon, AR Bhattacharyya;

Piezoelectric properties of noncovalently functionalized 2D nanomaterials incorporated poly (vinylidene fluoride) nanocomposites. Journal of Applied Polymer Science (2024), 141(3), e54814 (Impact Factor: 3.0, Q2)

​

​

 

2023

120. R Chakraborty, A Sharma, P Majee, Pooja, PK Maji, R Pawar, YN Banothu, MPradhan; Transformation of Waste Agarwood Leaves into Heteroatom-Doped Microporous Carbon for Highly Active Metal-Free Catalytic Oxygen Reduction Reaction and Efficient Capacitive Energy Storage Application. ACS Sustainable Resource Management (2023)

​

119. S Tathir, A Naqvi, C Singh, SK Godara, R B Jotania, PK Maji, CR. Vaja; Tunable electrical and impedance characteristics of Co–Zn doped M-type Sr Hexaferrites: Role of grain, grain boundaries, electrical transport mechanisms and software/circuit modeling. Ceramics International (2023) (Impact Factor: 5.2, Q1)

​

118. A Banerjee, M Sathwane, S Das, B Chattopadhyay, PK Maji*, U Nandi, A Ghosh; Direct current conductance and 1/f-noise in cellulose nanofiber–multi-walled carbon nanotube composites for applications in flexible electronic devices. Journal of Applied Physics (2023) 134, 20, 205101 (Impact Factor: 3.2, Q2)

​

117. R Jasrotia, N Kumari, R Verma, SK Godara, J Ahmed, SM Alshehri, B Pandit, S Kumar, S Sharma, PK Maji; Effect of rare earth (Nd3+) metal doping on structural, morphological, optical and magnetic traits of Zn–Mg nano-ferrites; Journal of Rare Earths (2023) 41, 11, 1763-1770 (Impact Factor: 4.9, Q1)

​

116. D Ramakanth, S Singh, S Bhardwaj, RS Meda, KK Gaikwad, PK Maji*; Green Synthesis and Characterization of Polymyrcene as an Oxygen Scavenging Sustainable Polymer for Active Food Packaging Applications; ACS Applied Polymer Materials (2023) 5, 12, 9888–9897 (Impact Factor: 5, Q1)


115. S Bhardwaj, S Singh, P Gupta, N Choudhary, PK Maji; Role of morphological arrangements in cellulose nanofiber-based aerogels for thermal insulation: A systematic review; International Journal of Green Energy (2023) 1-22 (Impact Factor: 3.3, Q2)
 
114. C Verma, M Chhajed, PK Maji; Liquid Crystal Cellulose Nanocrystal/ Polyvinylpyrrolidone Pigments Engineered from Agro-Waste Sugarcane Bagasse; Advanced Sustainable Systems (2023) 2300111 (Impact Factor: 7.1, Q1)
 
113. BK Mahur, A Ahuja, S Singh, PK Maji, VK Rastogi; Different nanocellulose morphologies (cellulose nanofibers, nanocrystals and nanospheres) extracted from Sunn hemp (Crotalaria Juncea); International Journal of Biological Macromolecules (2023) 253, 126657 (Impact Factor: 8.2, Q1)
 
112. I Mohammed, J Mohammed, SK Godara, PK Maji, P Kaur, and AK Srivastava; Synthesis, Characterization, and Electromagnetic Propertiesof Ba1.8Sr0.2Co2Fe11.9Pr0.1O22/Ti3C2Tx-MXene Composites; Physica Status Solidi (b) (2023) 23000149 (Impact Factor: 2.8, Q3)
 
111. S Singh, S Bhardwaj, RS Meda, C Verma, M Chhajed, K Ghosh, PK Maji; Insights into thermal degradation kinetics and liquid crystalline behavior of cellulose nanocrystals from the waste of Cajanus cajan (pigeon pea); International Journal of Biological Macromolecules (2023) 242, 124507 (Impact Factor: 8.2, Q1)
 
109. R Jaiswal, U Saha, TH Goswami, PK Maji; Effect of partially reduced fullerenol-graphene hybrid nanofiller on photophysical and super capacitance properties of fluorescence conducting polymer nanocomposites; Polymer Composites (2023) (Impact Factor: 5.2, Q1)
 
108. S Sharma, A Adaval, S Singh, PK Maji, CK Subash, VH Shafeeq, A Bhattacharyya; Influence of Graphene Oxide on Rheology, Mechanical, Dielectric, and Triboelectric Properties of Poly (vinyl alcohol) Nanocomposite Hydrogels Prepared via Facile One Step Process; Soft Matter (2023) (Impact Factor: 3.4, Q1)

107. A Adaval, BB Bhatt, S Singh, D Gupta, PK Maji, M Aslam, TW Turney, GP Simon, AR Bhattacharya; 2D Nanomaterials Incorporated Poly (vinylidene fluoride) Nanocomposites: Morphology, Crystalline Structure, and Dielectric, Ferroelectric, and Piezoelectric Properties; Journal of Physical Chemistry C (2023) (Impact Factor: 4.177, Q1)
 
106. P Kotwal, R Jasrotia, J Prakash, J Ahmed, A Verma, R Verma, A Kandwal, S K Godara, S Kumari, PK Maji, M Fazil, T Ahmad, M S Tamboli, N Sharma, R Kumar; Magnetically recoverable sol-gel auto-combustion developed Ni1-xCuxDyyFe2-yO4 magnetic nanoparticles for photocatalytic, electrocatalytic, and antibacterial applications; Environmental Research (2023) 231, 116103 (Impact Factor: 8.3, Q1) 106. G Katoch, J Prakash, R Jasrotia, A Verma, R Verma, S Kumari, T Ahmad, S K Godara, J Ahmed, AKandwal, M Fazil, PK Maji, S Kumar, G Kumar; Sol-gel auto-combustion developed Nd and Dy co-doped Mg nanoferrites for photocatalytic water treatment, electrocatalytic water splitting and biological applications; Journal of Water Process Engineering (2023) 53, 103726 (Impact Factor: 7.0, Q1)
 
105. SC Ambilkar, B P Kapgate, A Das, S Mandal, PK Maji, S Singh, R Kasilingam, R S Gedam, C Das; Precise role of zirconia to boost up the mechanical, thermal, viscoelastic, dielectric, and chemical resistance properties of natural rubber-nitrile rubber blend; European Polymer Journal (2023) 112163 (Impact Factor: 6.0, Q1)
 
104. SK Godara, SS Meena, R Jasrotia, J Prakash, A Verma, R Singh, AK Srivastava, M Singh, PK Maji, A Jain, AK Sood, J Ahmed, S M Alshehri, A Mehtab, T Ahmad, A Hossain, A Kandwal; Effect of Zn2+-Zr4+ co-substitution on structural, magnetic and dielectric properties of Ba0.5Ca0.5ZnxZrxFe12−2xO19 hexaferrite; Journal of Materials Science: Materials in Electronics 34 (2023) 15, 1195 (Impact Factor: 2.8, Q2)
 
103. R Jaiswal, U Saha, T H Goswami, PK Maji; Effect of partially reduced fullerenol‐graphene hybrid nanofiller on photophysical and super capacitance properties of fluorescence conducting polymer nanocomposites; Polymer Composites (2023) (Impact Factor:5.2, Q1)
 
102. R Chakraborty, S Das, S Rudra, A K Nayak, PK Maji, U Nandi, M Pradhan; Investigation of electrical transport properties in solution-processed Bi 2 Se 3–AgMnOOH nanocomposite; Physical Chemistry Chemical Physics (2023) 25, 20, 14606-14617 (Impact Factor: 3.3, Q1)
 
101. C Verma, SK Kardam, M Chhajed, U Nandi, PK Maji; Organic Acid-Doped Cellulose Nanocrystals in Biocomposite Laminates as Chiral Nematic Photonic Films: Implications for Intelligent Packaging; ACS Applied Nano Materials; (2023) DOI: 10.1021/acsanm.2c05177 (Impact Factor: 5.9, Q1)
 
100. P Gupta, M Sathwane, M Chhajed, C Verma, Y Grohens, B Seantier, AK Agrawal, PK Maji; Surfactant Assisted In Situ Synthesis of Nanofibrillated Cellulose/Polymethylsilsesquioxane Aerogel for Tuning Its Thermal Performance; Macromolecular Rapid Communications (2023) 44 (2), 2200628 (Impact Factor: 5.006, Q1)
 
99. M Chhajed, C Verma, P Gupta, PK Maji; Multifunctional esterified nanocellulose aerogel: impact of fatty chain length on oil/water separation and thermal insulation; Cellulose (2023), DOI: 10.1007/s10570-022-04993-w. (Impact Factor: 6.123, Q1)
 
98. M Chhajed, C Verma, S Singh, PK Maji; Synergistic effect of natural rubber for imparting hydrophobicity in nanocellulose aerogel through one-pot synthesis and its application in oil/organic solvent sorption; Journal of Water Process Engineering (2023) 51, 103471 (Impact Factor: 7.0, Q1)
 
97. S Rudra, S Das, PK Maji, AK Nayak, Y Negishi, M Pradhan, U Nandi; Redox-Guided Synthesis of Au–V2O5–MnO2 Nanoflower Composites with Enhanced Electrical Conductance for Supercapacitor Applications; ACS Applied Nano Materials (2023) DOI: 10.1021/acsanm.2c04584 (Impact Factor: 5.9, Q1)
 
96. A Adaval, CK Subash, VH Shafeeq, S Singh, PK Maji, M Aslam, TW Turney, GP Simon, AR Bhattacharyya; Exploring interfacial interactions, dielectric, ferroelectric and piezoelectric properties of ultrahigh molecular weight polyethylene/graphene oxide nanocomposites; Journal of Applied Polymer Science (2023) 140 (4), e53379 (Impact Factor: 3.0, Q2)
 
95. T Rom, S Laha, S Gadiyaram, PK Maji, AK Paul; Rare-earth (Nd and Eu) induced structural transformation and optical properties of brownmillerite-type Sr2ScGaO5 oxide; Journal of Solid State Chemistry (2023) 317, 123696 (Impact Factor: 3.3, Q2)

94. S Sarmah, KP Patra, PK Maji, S Ravi, T Bora; A comparative study on the structural, magnetic and dielectric properties of magnesium substituted cobalt ferrites; Ceramics International (2023) 49 (1), 1444-1463 (Impact Factor: 5.2, Q1)
 
93. Renuka Verma, Pradip K. Maji, Sudipta Sarkar; Removal of hexavalent chromium from impaired water: Polyethylenimine-based sorbents - A review; Journal of Environmental Chemical Engineering (2023) DOI: 10.1016/j.jece.2023.109598 (Impact Factor: 7.7, Q1)
 
92. S Bhardwaj, S Singh, RS Meda, S Jain, PK Maji; Structural and morphological exploration of cellulose nanocrystals extracted from lignocellulosic waste biomass of Brassica nigra (mustard straw); Biomass Conversion and Biorefinery (2023) (Impact Factor: 4.00, Q3)
 
91. M Sathwane, M Chhajed C Verma, K. K. Gaikwad, PK Maji; Synergistic effect of hybrid hydroxylated boron nitride and cellulose nanocrystals for enhancing the thermal, mechanical, and hydrophobic properties of composite film; DOI: 10.1002/pc.27112 (2022) Polymer Composites (Impact Factor: 5.2, Q1)

2022

90. C Verma, M Chhajed, S Singh, M Sathwane, PK Maji; Bioinspired Structural Color Sensors based on Self-Assembled Cellulose Nanocrystal/Citric acid to Distinguish Organic Solvents; Colloids and Surfaces A: Physicochemical and Engineering Aspects (2022) 655, 130206 (Impact Factor: 5.2, Q1)

89. U Saha, R Jaiswal, TH Goswami, PK Maji; Role and effect of electrolytes selection on supercapacitance behaviour of aminated graphenes; Electrochimica Acta (2022) 435, 141400 (Impact Factor: 6.6, Q1)
 
88. DS Aherrao, C Singh, VL Mathe, PK Maji, AK Srivastava; Investigation of structural, morphological, electric modulus, AC conductivity characteristics, and validation of software-based simulated impedance/material parameters of bicomponent Co-Al doped Ba-Sr ferrites; Physica Scripta (2022) 98 (1), 015813 (Impact Factor: 2.9, Q2)
 
87. S Singh, S Bhardwaj, C Verma, M Chhajed, K Balayan, K Ghosh, PK Maji; Elliptically birefringent chemically tuned liquid crystalline nanocellulose composites for photonic applications; Journal of Molecular Liquids (2022) 366, 120326 (Impact Factor: 6.0, Q1)
 
86. E Priya, S Kumar, C Verma, S Sarkar, PK Maji; A comprehensive review on technological advances of adsorption for removing nitrate and phosphate from waste water; Journal of Water Process Engineering (2022) 49, 103159
(Impact Factor: 7.0, Q1)
 
 
85. C Verma, M Chhajed, S Singh, PK Maji; Cellulose Nanocrystals for Environment-Friendly Self-Assembled Stimuli Doped Multisensing Photonics; DOI: 10.1021/acsapm.2c00061 (2022); ACS Applied Polymer Materials (Impact Factor: 5, Q1)
 
84. S Roy, KL Goh, C Verma, B Dasgupta Ghosh, K Sharma, PK Maji; A Facile Method for Processing Durable and Sustainable Superhydrophobic Chitosan-Based Coatings Derived from Waste Crab Shell; ACS Sustainable Chemistry & Engineering 10 (14), (2022) 4694-4704(Impact Factor: 8.4, Q1)
 
83. Monika Chhajed, Chhavi Verma, Manoj Sathawane, Shiva Singh and Pradip K Maji; Mechanically durable green aerogel composite based on agricultural lignocellulosic residue for organic liquids/oil sorption; Marine Pollution Bulletin (2022) 180, 113790 (Impact Factor: 5.8, Q1)
 
82. D Ramakanth, K Akhila, KK Gaikwad, PK Maji; UV-activated oxygen scavenging system based on natural rubber latex from Hevea brasiliensis for active packaging applications; Industrial Crops and Products 178, (2022)114658
(Impact Factor: 5.9, Q1)
 
81. Sunanda Roy, T. Das, K. L.Goh, Chhavi Verma, Pradip K. Maji, Synergistic effect of fresh garlic juice in cellulose-based food packaging film; Materials Letters; DOI: 10.1016/j.matlet.2022.132538 (2022) (Impact Factor:

  1. 0, Q2)


80. S Sarmah, KP Patra, PK Maji, S Ravi, T Bora; A comparative study on the structural, magnetic and dielectric properties of magnesium substituted cobalt ferrites; DOI: 10.1016/j.ceramint.2022.09.126 (2022) Ceramics International (Impact Factor: 5.2, Q1)
 
79. J Barman, N Deka, PK Maji, GK Dutta; Nitrogen and Sulfur Enriched Porous Carbon Materials with Trace Fe Derived from Hyper‐Crosslinked Polymer as an Efficient Oxygen Reduction Electrocatalyst; ChemElectroChem (2022) 9 (15), e202200677 (Impact Factor: 4.0, Q1)
 
78. Rohit Jasrotia, Nisha Kumari, Ritesh Verma, Sachin Kumar Godara, Jahangeer Ahmed, Saad M Alshehri, Bidhan Pandit, Sanjay Thakur, Shubham Sharma, Pradip K Maji; Effect of rare earth (Nd3+) metal doping on structural, morphological, optical and magnetic traits of Zn–Mg nano-ferrites; DOI: 10.1016/j.jre.2022.08.015 (2022); Journal of Rare Earths (Impact Factor: 4.9, Q2)
 
77. WL Lai, S Sharma, S Roy, PK Maji, B Sharma, S Ramakrishna, KL Goh; Roadmap to sustainable plastic waste management: a focused study on recycling PET for triboelectric nanogenerator production in Singapore and India; Environmental Science and Pollution Research (2022), 1-35 (Impact Factor: 5.8, Q1)
 
76. Sachin Kumar Godara, Varinder Kaur, Parambir Singh Malhi, Jahangeer Ahmed, Saad M Alshehri, Mandeep Singh, Swati Verma, Charanjeet Singh, Pradip K Maji, Pragati Kumar, Asiya M Tamboli, Ashwani Kumar Sood; Sol-gel auto-combustion synthesis of double metal-doped barium hexaferrite nanoparticles for permanent magnet applications; DOI: 10.1016/j.jssc.2022.123215 (2022) Journal of Solid State Chemistry (Impact Factor: 3.3, Q2)
 
 
75. Debabrata Ganguly, Abhijit Bera, Roumita Hore, Sipra Khanra, Pradip K Maji, Dinesh Kumar Kotnees, Santanu Chattopadhyay; Coining the attributes of nano to micro dual hybrid silica-ceramic waste filler based green HNBR composites for triple percolation: Mechanical properties, thermal, and electrical conductivity; Chemical Engineering Journal Advances (2022) 11, 100338 (New Journal, Q1)
 
74. R Verma, PK Maji, S Sarkar; Detailed investigation of effective trace Cr (VI) removal mechanism by anion exchange resin with phenol–formaldehyde matrix; Journal of Industrial and Engineering Chemistry (2022)
 
(Impact Factor: 6.1, Q1)
 
73. S Sarmah, R Borah, PK Maji, S Ravi, T Bora; Effect of Al3+ substitution on structural, magnetic and dielectric properties of cobalt ferrite synthesized by sol-gel method and its correlation with cationic distribution; Physica B: Condensed Matter, 414017 (2022) (Impact Factor: 2.8, Q2)
 
72. Sachin Kumar Godara, Varinder Kaur, Parambir Singh Malhi, Jahangeer Ahmed, Saad M Alshehri, Mandeep Singh, Swati Verma, Charanjeet Singh, Pradip K Maji, Pragati Kumar, Asiya M Tamboli, Ashwani Kumar Sood; ol-gel auto-combustion synthesis of double metal-doped barium hexaferrite nanoparticles for permanent magnet applications; Journal of Solid State Chemistry, (2022) 123215 (Impact Factor: 3.3, Q2)
 
71. ​Bhavna Sharma, Sauraj Singh, Brahma Prakash, Harish Sharma, PK Maji, Dharm Dutt, Anurag Kulshreshtha; Effect of cellulose nanocrystal incorporated acrylic copolymer resin on printing properties of waterborne inks; Progress in Organic Coatings 167 (2022), 106842 (Impact Factor: 6.6, Q1)
 
70. Anjori Sharma, Sachin Kumar Godara, Pradip K Maji, AK Srivastava; Influence of Temperature on Structural and Magnetic Properties of Gd3AlxFe5−xO12 (x = 2); Crystal Research and Technology 57 (2022) (2), 2100109
 
(Impact Factor: 1.5, Q3)
 
69. Sachin Kumar Godara, Varinder Kaur, AK Srivastava, Deepak Basandrai, Jahangeer Ahmed, J Mohammed, Mandeep Singh, Paramjit Kaur, Amir Mehtab, Tokeer Ahmad, Rahul Kumar Dhaka, Pradip K Maji, Ashwani Kumar Sood; Effect on Magnetic, morphological and structural properties of Zn2+-Zr4+ substituted SrM for permanent magnet based appliances; Journal of Magnetism and Magnetic Materials (2022) 560, 169626 (Impact Factor: 2.7,
Q2)
 
68. T Rom, S Laha, S Gadiyaram, PK Maji, AK Paul; Rare-earth (Nd and Eu) induced structural transformation and optical properties of brownmillerite-type Sr2ScGaO5 oxide; Journal of Solid State Chemistry (2022), 123696
 
(Impact Factor: 3.3, Q2)
 
67. R Verma, PK Maji, S Sarkar; Synthesis and validation of polystyrene-based polyethylenimine composite for Cr (VI) removal from aqueous solution: Performance and mechanism; Journal of Environmental Chemical Engineering 10 (1) (2022), 107119 (Impact Factor: 7.7, Q1)
 
66. T Rom, N Kumar, PK Maji, AK Paul; Synthesis, Structure and Topology of Copper (I) Tetrazolate Framework: Facile Approach to Design Multiple Dye Adsorbent with Carbon Composites; ChemistrySelect 7 (8) (2022), 202103520 (Impact Factor: 2.1, Q2)
 
65. Radheesh Sharma Meda, Somya Jain, Shiva Singh, Chhavi Verma, Upendranath Nandi, Pradip K. Maji; Novel LAGENARIA SICERARIA Peel Waste based Cellulose Nanocrystals: Isolation and Rationalizing H-bonding Interactions; Industrial Crops and Products (2022) 186, 115197 (Impact Factor: 5.9, Q1)

2021

64. Chhavi Verma, Monika Chhajeda, Pragya Gupta, Sunanda Roy, Pradip K. Maji, Isolation of cellulose nanocrystals from different waste bio-mass collating their liquid crystal ordering with morphological exploration; International Journal of Biological Macromolecules 175 (2021) 242–253 (Impact Factor: 8.2, Q1)

63 Sunanda Roy, Pradip K Maji, Kheng-Lim Goh, Sustainable Design of Flexible 3D Aerogel from Waste PET Bottle for Wastewater Treatment to Energy Harvesting Device, Chemical Engineering Journal (2021) 385, 127409 (Impact Factor: 15.1, Q1)

62. Dakuri Ramakanth, Suman Singh, Pradip K Maji, Youn Suk Lee, Kirtiraj K Gaikwad, Advanced packaging for distribution and storage of COVID-19 vaccines: a review, Environmental Chemistry Letters (2021) DOI: 10.1007/s10311-021-01256-1, (Impact Factor: 15.7, Q1)

61. Vidhi Gupta, Dakuri Ramakanth, Chhavi Verma, Pradip K Maji, Kirtiraj K. Gaikwad; Isolation and characterization of cellulose nanocrystals from amla (Phyllanthus Emblica) pomace. Biomass Conversion and Biorefinery (2021) https://doi.org/10.1007/s13399-021-01852-9 (Impact Factor: 4.00, Q3)

60. Pragya Gupta, Akanksha Pandey, Kirtiraj K. Gaikwad, Sunanda Roy, Pradip K. Maji, The role of rheological premonitory of hydrogels based on cellulose nanofibers and polymethylsilsesquioxane on the physical properties of corresponding aerogels; Polymer Engineering and Science (2021), DOI: 10.1002/pen.25671 (Impact Factor: 3.2, Q2)

59. Renuka Verma, Pradip K. Maji, Sudipta Sarkar, Comprehensive investigation of the mechanism for Cr(VI) removal from contaminated water using coconut husk as a biosorbent, Journal of Cleaner Production (2021) 314, 128117 (Impact Factor: 11.1, Q1)

58. Divya Rajasekaran, Pradip K. Maji, Recycling of waste PP and crumb rubber together by use of self-healing ionomer as process compatibilizer; Journal of Material Cycles and Waste Management (2021) (DOI: 10.1007/s10163-021-01194-8) (Impact Factor: 3.1, Q2)

57. Bhavna Sharma, Singh Sauraj, Bijender Kumar, Arun Pandey, Dharm Dutt, Yuvraj Singh Negi, Pradip K Maji, Anurag Kulshreshtha, Synthesis of waterborne acrylic copolymer resin as a binding agent for the development of water‐based inks in the printing application, Polymer Engineering & Science (2021) DOI: 10.1002/pen.25681(Impact Factor: 3.2, Q2)

56. P Choudhury, S Chawla, S Agarwal, A Singh, A Nayak, A Kumar, PK Maji, C Goswami, L Goswami, Modified tamarind kernel polysaccharide-based matrix alters neuro-keratinocyte cross-talk and serves as a suitable scaffold for skin tissue engineering, Materials Science and Engineering: C (2021) 121, 111779 (Impact Factor: 7.328, Q1)

55. S Sarkar, PK Maji, Y Negishi, S Dutta, TN Das, R Pan, S Sarkar, Cu (II)-Based Nanofibrous Metallogel for Phenoxazinone Synthase-like Activity, ACS Applied Nano Materials (2021) DOI: 10.1021/acsanm.0c02984 (Impact Factor: 5.9, Q1)

54. Tusar K Acharya, Satish Kumar, Nikhil Tiwari, Arijit Ghosh, Ankit Tiwari, Subhashis Pal, Rakesh K Majhi, Ashutosh Kumar, Rashmita Das, Abhishek Singh, Pradip K. Maji, Naibedya Chattopadhyay, Luna Goswami, Chandan Goswami; TRPM8 channel inhibitor-encapsulated hydrogel as a tunable surface for bone tissue engineering, Scientific Reports (2021) 11, 1-16 (Impact Factor: 4.6, Q1)

53. Mukul Pradhan, Rishika Chakraborty, Siddheswar Rudra, Sudipta Koley, Pradip K Maji, Arpan Kumar Nayak, Sutanu Das, Upendranath Nandi, Intercalation pseudocapacitance in Bi2Se3−MnO2 nanotube composite for high electrochemical energy storage, Electrochimica Acta (2021) 367, 137531 (Impact Factor: 6.6, Q1)

52. S Sarmah, PK Maji, S Ravi, T Bora, Effect of cation distribution and temperature variation on magnetic and dielectric properties of manganese substituted cobalt ferrites, Solid State Communications (2021) 324, 114146 (Impact Factor: 2.1, Q3)

51. Rishika Chakraborty, Pradip K. Maji, Chhavi Verma, Arpan Kumar Nayak, Shib Shankar Singha, Mukul Pradhan, Inherent Oxygen‐ and Nitrogen‐Doped Porous Carbon Derived from Biomass of Tamarind Leaf for High‐Performance Supercapacitor Application; Energy Technology (2021) 9, 2000734 (Selected as Hot Topics in chemistry and materials) (Impact Factor: 3.8, Q2)

50. Chandravati Yadav, Monika Chhajed, Priyanka Choudhury, Ram Prasad Sahu, Amit Patel, Saurabh Chawla, Luna Goswami, Chandan Goswami, Xinping Li, Ashish K Agrawal, Arun Saini, Pradip K Maji; Bio-extract amalgamated sodium alginate-cellulose nanofibres based 3D-sponges with interpenetrating BioPU coating as potential wound care scaffolds, Materials Science and Engineering: C (2021) 118, 111348. (Impact Factor: 7.328, Q1)

2020

49. M Bera, A Prabhakar, PK Maji, Nanotailoring of thermoplastic polyurethane by amine functionalized graphene oxide: Effect of different amine modifier on final properties, Composites Part B: Engineering, 108075 (2020) (Impact Factor: 13.1, Q1)

48. Suman Singh, Pradip K Maji, Youn Suk Lee, Kirtiraj K Gaikwad, Applications of gaseous chlorine dioxide for antimicrobial food packaging: a review, Environmental Chemistry Letters (2020) 2, 1-18. (Impact Factor: 15.7, Q1)

47. Sunanda Roy, Hyun-U Ko, Pradip K Maji, Le Van Hai, Jaehwan Kim; Large Amplification of Triboelectric Property by Allicin to Develop High Performance Cellulosic Triboelectric Nanogenerator, Chemical Engineering Journal (2020) 385, 123723. (Impact Factor: 15.1, Q1)

46. Rajendiran Kanagaraj, Ajay Kumar Jana, PD Babu, Vasudeva Siruguri, Pradip K Maji, Swarup K Panda, Avijit Kumar Paul, Investigation of multiferroic behaviour at room temperature in Bi-induced orthoferrite: combined experimental and first principles studies, Bulletin of Materials Science (2020) 43, 1-14. (Impact Factor: 1.8, Q3)

45. Shiva Singh, Gopal L Dhakar, Bharat P Kapgate, Pradip K Maji, Chhavi Verma, Monika Chhajed, Kasilingam Rajkumar, Chayan Das, Synthesis and chemical modification of crystalline nanocellulose to reinforce natural rubber composites, Polymers for Advanced Technologies (2020) 12, 3059 (Impact Factor: 3.4, Q2)

44. Divya Rajasekaran, Pradip K. Maji; Recycling of quaternary household plastic wastes by utilizing poly (ethylene- co- methacrylic acid) copolymer sodium ion: Compatibility and re-processability assessments, Journal of Polymers and the Environment (2020), 28 (2), 471-482 (Impact Factor: 5.3, Q1)

43. Rajendiran Kanagaraj, Ajay Kumar Jana, PD Babu, Vasudeva Siruguri, Pradip K Maji, Swarup K Panda, Avijit Kumar Paul, Template-directed hierarchical copper (II)-organophosphonate compounds: Syntheses, crystal structures, magnetic and luminescence properties, Journal of Molecular Structure (2020) 1124, 129027. (Impact Factor: 3.8, Q2)

42. Animesh Kr. Dey, Gaurav Kumar, Pradip K. Maji, R. K. Chakrabarty, and U. N. Nandi; Zener-like electrical transport in polyaniline-graphene oxide nanocomposite; RSC Advances (2020) 10 (8), 4733-4744 (Impact Factor: 3.9, Q2)

41. Gaurav Kumar, Jyoti Prakash Singh, Uttam Saha, Madhab Bera, Tako Hari Goswami, Pradip K. Maji, A mechanistic approach for the modulation of band gap of nanopolyaniline using various heterogeneous carbon nanostructures, Polymer Bulletin, 77 (7), 3499-3521 (2020) (Impact Factor: 3.2, Q2)

40. A Maji, O Singh, S Singh, A Mohanty, PK Maji, K Ghosh, Palladium‐based Catalysts Supported by Unsymmetrical XYC‐1 Type Pincer Ligands: C5 Arylation of Imidazoles and Synthesis of Octinoxate Utilizing Mizoroki‐Heck Reaction, European Journal of Inorganic Chemistry (2020) 17, 1596 (Impact Factor: 2.3, Q2)

39. J Mohammed, T Tchouank Tekou Carol, G Mukhtar, V Kumar, Gopala Ram Bhadu, Sachin Kumar Godara, Pradip K Maji, AK Srivastava; Phase structure evolution, crystal structure refinement, morphology, and electro-optical properties of heat-treated Ca0. 9Ni0. 1Cu2. 9La0. 1Ti4O12; Ceramics International (2020) 46 (6), 7187-7197(Impact Factor: 5.2, Q1)

38. AK Dey, UN Nandi, PK Maji, RK Chakrabarty; Nonlinearity exponent: A phase sensitive parameter in disordered systems; Physica B: Condensed Matter (2020), 582, 412001 (Impact Factor: 2.8, Q2)

37. Vikas Kumar, J Mohammed, Carol T Tchouank Tekou, G Mukhtar, N Halilu, IA Adamu, Pradip K Maji, Deepak Basandrai, AK Srivastava; Structural and Dielectric Properties of Bi-Zn Substituted Calcium Copper Titanate (CCTO), Journal of Physics: Conference Series (2020) 1531, 012004. (Q4)
36. J Mohammed, Jyoti Sharma, KU Yerima, D Basandrai, Arun Kumar, Pradip K Maji, AK Srivastava; Magnetic, Mössbauer and Raman Spectroscopy of Nanocrystalline Dy3+-Cr3+ Substituted Barium Hexagonal Ferrites; Physica B: Condensed Matter (2020), 10.1016/j.physb.2020.412115. (Impact Factor: 2.8, Q2)

For pre-2020 publications, download full biodata

© IIT Roorkee 2024

bottom of page